Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2017-11-10 08:05
359
tianhuadianzi(Mr.)
Zhejiang
6th Floor, Building No.10, New World Business Center, Xiacheng District, Hangzhou 310022, China
http://www.chinaskycctv.com/ http://tianhuadianzi.cn-embroidery.com/
HD IP PoE Over Coaxial Cable Extender for CCTV Camera (IPVE602)
Description:
HD IP POE Extender is new designed Ethernet Device. This device is designed to extend IP camera signal over existing coaxial cable, support 10pcs IP cameras working in one group simultaneously. The max distance is up to 2500M, network max baud rate is up to 100Mbps.
This series products are widely used in CCTV surveillance and remote network extension.
Features:
1、 Transmit 10/100 Mb Full Duplex Ethernet up to 8000ft (2500m) or more over Coax Cable.
2、 Voltage: DC 12V~53V (POE model: DC 48V~53V)
Powers PoE, or High Power PoE cameras, up to 60 watts.
3、 Easy configuration, no PC required
4、 Transparently supports all networking protocols (UTP, TCP/IP, HTTP, Multicast with IGMP, etc)
5、 Code standard: abide by IEEE802.3 10/100 base-TX Ethernet standard protocol
6、 Advanced 128-bit AES encrypted transmission and PoE+ power technology
7、 Built-in transient protection; industrial temperature range, excellent lightning protection and strongly Anti-interference, surge protection
8、 Protection: Excellent Circuit Isolation protection, effectively enhance the device ability of lightning proof, anti-static, anti-interference.
Installation Steps:
Before installation, check the device and accessories. If meet any parts loss, you can just contact us.
1、HD IP POE Extender 1pc
2、Manual 1pc
3、Power Supply (optional device)
Please follow the below steps to install:
1、 Firstly Connect the signal cables, then connect Power. (Install with power may destroy device)
2、 Connect NVR/Switches:
--RJ45 Ethernet (CAT5e/6) cable one side connect the Device Ethernet Port
--RJ45 Ethernet (CAT5e/6) cable another side connect NVR/Switches Port
--Use Coaxial cable one side connect the Device BNC
3、Connect the IPC.
--RJ45 Ethernet (CAT5e/6) cable one side connect the Device Ethernet Port
--RJ45 Ethernet (CAT5e/6) cable another side connect IPC net Port
--Use Coaxial cable another side connect the Device BNC
4、Check the installation is right, device is no damage, guarantee all the link is stable, connect the power supply cable, to power the whole system.
Failure Removal:
If the device meets trouble, follow the below steps to solve:
1、 According to the LED indicator primary localize the trouble occur region
2、 If LED all is lighting off, please check whether the system power is normal
3、 If only Net port LED indicator is lighting off, please check whether the network cable link is Loose, and check all the IPC/Switches etc Device is working normally
4、 If only BNC link LED indicator is lighting off, please check the below reasons:
--Whether the Coaxial cable is Loose
--Whether the Coaxial Cable length beyond the MAX transmission distance
--Whether the 2 interconnection devices’ password are not same
5、After above detection, if the trouble is still not solved, please contact us.
Specifications:
Items |
Description |
|
Technology Standard |
Standard |
Home Plug AV IEEE 802.3 10/100 Ethernet (100Mbps) IEEE 802.3u Fast Ethernet |
Encryption Algorithm |
Algorithm |
128-bit AES |
Power |
Supply mode |
Power Adapter |
Voltage range |